Beijing North Zhongyi Heavy Machinery Co., LTD. : Handling Machinery equipment (2)
Description：Crane installation in a standard or special truck chassis, the vast majority, there are two drivers ....
Crane installation in a standard or special truck chassis, the vast majority, there are two drivers room, one for the manipulation of the lifting operation, another manipulation, lifting operation must be put down the leg, and therefore can't cargo, its wheel pressure, appearance size is accord with the requirement of highway, driving with the engine power is larger, It can often be used in the far distance of the operation site, lifting and driving, but in port loading and unloading operations, its driving characteristics can not be fully played. The characteristic of the tire crane is that it has only one driver's cab, which controls the lifting operation and driving at the same time; Its special chassis can better meet the requirements of lifting operations, the wheelbase and wheelbase configuration is more appropriate, so the stability is good, in the use of short arm, allowed on the flat ground with no leg when the rated lifting weight of 75% of the cargo for lifting. Increased mobility of lifting operations. Its running speed is generally lower than 30 km/h, some up to 50 km/h, suitable for the operation site is fixed, mainly to lift and take into account the driving situation. Therefore, the tire crane is widely used in the port wharf.
This article is compiled by Beijing North Zhongyi Heavy Machinery Co., LTD
