Beijing North Zhongyi Heavy Machinery Co., LTD.: Code of Operation for roller (2)
Description：6. The adjustment of reversing clutch, shock starting clutch and brake should be carried out after t....
6. The adjustment of reversing clutch, shock starting clutch and brake should be carried out after the main clutch is released.
7. Do not use fast gear when going up or down. In a sharp turn, including articulated vibratory roller in a small turn around the ring of rolling, is strictly prohibited to use fast gear.
8, the roller at high speed should not engage vibration.
9. Stop the vibration first, then put the reversing mechanism in the middle position, the transmission in neutral, and finally pull up the hand brake lever, the internal combustion engine idling for a few minutes after the ignition.
10. Other operating requirements shall comply with the regulations of static pressure roller.
This article is compiled by Beijing North Zhongyi Heavy Machinery Co., LTD
